CXLS4261 CXLS4262是一种负载开关，它为以下系统和负载提供全面保护可能遇到大电流情况。CXLS4261 CXLS4262提供95mΩ限流开关，可以在2.5-5.5V的输入电压范围内运行。电流限制可外部编程通过一个精确的电阻，范围从75mA到1.4A。开关控制通过一个逻辑输入（EN）能力直接与低压控制信号接口。当开关断开，输出电压高于输入电压。CXLS4261 CXLS4262还具有热关机保护，在连续工作时关闭开关以防止损坏部件电流过大会导致过热。当开关电流达到电流极限时，部件以恒流模式运行，以防止过大电流造成损坏。
在电流限制故障后，CXLS4261 CXLS4262不会关闭，而是保持恒定
当前模式无限期。在过电流和反向电压条件下，nFAULT输出认定为低。
-
[ CXLS4261 ]
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载（产品PDF文档）
5.产品封装图 6.电路原理图 7.功能概述 8.相关产品
一,产品概述(General Description)
The CXLS4261 CXLS4262 is a load switch which provides full protection to systems and loads which
may encounter large current conditions. CXLS4261 CXLS4262 offers a 95mΩ current‐limited switch which can
operate over an input voltage range of 2.5‐5.5V. The current limit can be externally programmed
by a precision resistor, ranges from 75mA to 1.4A.Switch control is by a logic input (EN) capable
of interfacing directly with low voltage control signals. Current is prevented from flowing when
the switch is off and the output voltage is higher than the input voltage. CXLS4261 CXLS4262 also features
thermal shutdown protection which shuts off the switch to prevent damage to the part when acontinuous
over‐current condition causes excessive heating. When the switch current reaches the current limit,
the parts operate in a constant‐current mode to prohibit excessive currents from causing damage.
The CXLS4261 CXLS4262 will not turn off after a current limit fault, but will rather remain in the constant
current mode indefinitely. The nFAULT output asserts low during over‐current and reverse‐voltage conditions.
CXLS4261 CXLS4262 is housed in a tiny DFN2x2‐6L package
二.产品特点(Features)
Up to 1.4A Max Load current
Accurate Current‐limit threshold: +/‐5%
Programmable Current‐limit : 75mA to 1.4A
Fast Over‐Current Response
Fault Flag Output: nFAULT Pin
Reversed Current blocking
Thermal Shutdown, UVLO protection
Tiny DFN2x2‐6L 、SOT23‐6 Package
三,应用范围 (Applications)
USB ports/Hubs
Hot Swaps
Cellphones
Tablet PC
Set Top Box
PC motherboard
Handheld Devices
四.技术规格书下载（产品PDF）
需要详细的PDF规格书请扫一扫微信联系我们
五,产品封装图 (Package)
六.电路原理图
七,相关芯片选择指南
|
精密限流负载开关(Load Switch) |
|||||||
|
Part No. |
Features |
VIN |
IQ |
Current Limit Threshold |
Power switch On Resistance |
Package |
Application |
|
Reverse Voltage Protection, OTP, UVLO, Faultflag Output |
2.5~5.5V |
120μA |
75mA~1.7A |
95mΩ |
DFN2X2-6L |
STB,MID |
|
|
Reverse Voltage Protection, OTP, UVLO |
2.5~5.5V |
150μA |
Max. 1.5A |
250mΩ |
SOT23-5 |
STB,MID |
|
|
启动延时电路 |
2~12V |
350μA |
1mA |
300Ω@Vin=6V |
SOT23-6 |
玩具 |
|
◀ 上一篇:CXLE8808D带有源功率因数校正的高精度非隔离降压型LED恒流控制芯片90Vac-264Vac全范围输入电压有源功率因数校正电路电感电流临界连续模式高PF值低THD
下一篇▶:CXLS4262
| 推荐信息 |
|---|
[/e:loop] |
| 头条信息 |
|---|
