CXAR41201是一款单桥音频功率放大器，专为便携式通信设备应用和移动电话中的高要求应用而设计。CXAR41201YPS8能够将2.4W的连续平均功率传输到4Ω负载中，通常由5伏电池电压产生10%的失真（THD+N）。它工作在2.5V到5.5V的电源。
当对SHDN引脚施加V+时，激活CXAR41201电源关闭模式（ISD=0.07μA典型值）。由于CXAR41201不需要输出耦合电容器、自举电容器或缓冲网络，因此它非常适合需要最小体积和重量的低功耗便携式系统。
CXAR41201是单位增益稳定的，可以通过外部增益设置电阻器进行配置。此外，CXAR41201具有内部热关机保护机制。
CXAR41201有绿色SOIC-8和SOIC-8（外露衬垫）封装。它在-40℃到+85℃的环境温度范围内工作。
•THD+N=10%时的输出功率，1kHz
CXAR41201YPS8:2.4W（典型）输入4Ω负载
CXAR41201YS8:1.5W（典型）输入8Ω负载
•单位增益稳定
•2.5V至5.5V操作
•关断电流：0.07μA（典型值）
•热过载保护电路
•无输出耦合电容器，自举
需要电容器或缓冲网络
•外部增益配置能力
•-40℃至+85℃工作温度范围
•提供绿色SOIC-8（外露衬垫）和
-
[ CXAR41201 ]
目录
7.相关产品
产品概述 返回TOP
The CXAR41201 is a mono bridged audio power amplifier that is designed for portable communication device applications and demanding applicationsin mobile phones. CXAR41201YPS8 is capable of delivering 2.4W of continuous average power into a 4Ω load with typically 10% distortion (THD+N) from a 5V battery voltage. It operates from 2.5V to 5.5V power supply.
The CXAR41201’smicro-power shutdown mode (ISD = 0.07μA TYP) is activated when V+ is applied to the SHDN pin. Since the CXAR41201 does not require output coupling capacitors, bootstrap capacitors, or snubber networks, it is ideally suited for low power portable systems that require minimum volume and weight.
The CXAR41201 is unity-gain stable and can be configured by external gain-setting resistors. Additionally, the CXAR41201 features an internal thermal shutdown protection mechanism.
The CXAR41201 is available in Green SOIC-8 and SOIC-8 (Exposed Pad) packages. It operates over an ambient temperature range of -40℃ to +85℃.
产品特点 返回TOP
• Output Power at THD+N = 10%, 1kHz
CXAR41201YPS8: 2.4W (TYP) into 4Ω Load
CXAR41201YS8: 1.5W (TYP) into 8Ω Load
• Unity Gain Stable
• 2.5V to 5.5V Operation
• Shutdown Current: 0.07μA (TYP)
• Thermal Overload Protection Circuitry
• No Output Coupling Capacitors, Bootstrap
Capacitors or Snubber Networks Required
• External Gain Configuration Capability
• -40℃ to +85℃ Operating Temperature Range
• Available in Green SOIC-8 (Exposed Pad) and
SOIC-8 Packages
应用范围 返回TOP
Portable Systems
Wireless Handsets
Mobile Phone
PDAs
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
音频功率放大器 |
||||||||
|
Part Number |
CH |
SHDN |
VCC (Min)(V) |
VCC (Max)(V) |
Differential Input |
Output Voltage @VCC=3.6V(W) |
Output Voltage @VCC=5V(W) |
Package |
|
Stereo |
H |
2.8 |
5.5 |
N |
0.7 |
1.3 |
DIP-16 TSSOP-20(EP) TSSOP -16(EP) SOIC-16TQFN-3x3-20L |
|
|
Stereo |
L |
2.6 |
5.5 |
N |
0.7 |
1.3 |
TQFN-4x4-16L |
|
|
Mono |
H |
2.5 |
5.5 |
N |
1.2 |
SOIC-8 SOIC-8(EP) |
||
|
Stereo |
L |
2.8 |
5.5 |
N |
0.7 |
1.3 |
TQFN-4x4-24L |
|
|
Mono |
L |
2.5 |
5.5 |
N |
0.6 |
1.2 |
TDFN-2x2-8L |
|
|
Mono |
L |
2.5 |
5.5 |
Y |
0.65 |
1.3 |
TDFN-3x3-8L MSOP-8(EP) |
|
|
Mono |
L |
2.5 |
5.5 |
Y |
0.65 |
1.3 |
TDFN-2x2-8L |
|
|
Mono |
L |
2.5 |
5.5 |
Y |
0.65 |
1.3 |
MSOP-8 MSOP-10 TDFN-3x3-10L |
|
◀ 上一篇:CXAR41200立体声音频功率放大器移动电话和其他便携式通信设备通道2.6W的连续平均功率从5V电源传输到4Ω负载中通常失真率为10%外部控制低功耗关机模式和热关机保护
下一篇▶:CXAR41202立体声耳机放大器模式弹出/点击抑制电路耳机启用模式双桥连接的音频功率放大器当连接到5V电源它将向4Ω负载输出2.1W向3Ω负载输出2.5W通常为1%THD+N
| 推荐信息 |
|---|
| 头条信息 |
|---|
