CXAR41199是一个双桥连接的音频功率放大器，当连接到5V电源时，将2.1W输出到4Ω负载，或2.5W输出到3Ω负载，通常为1%THD+N。此外，耳机输入引脚允许放大器在驾驶立体声耳机时以单端模式工作。
为了简化音频系统设计，CXAR41199将双桥扬声器放大器和立体声耳机放大器结合在一个芯片上。
CXAR41199具有低功耗关机模式和热关机保护。它还利用电路来减少设备开启时的“弹出/点击”。
CXAR41199有绿色TSSOP-20（外露衬垫）、TQFN-3×3-20L、TSSOP-16（外露衬垫）、SOIC-16和DIP-16包装。它在-40℃到+85℃的环境温度范围内工作。
•2.5W到3Ω负载，从5V电源
THD+N=1%（典型，每个通道）
•2.1W到4Ω负载，从5V电源
THD+N=1%（典型，每个通道）
•1.3W到8Ω负载，从5V电源
THD+N=1%（典型，每个通道）
•低关机电流：0.03μA
•工作电源电压：2.8V至5.5V
•立体声耳机放大器模式
•“弹出/点击”抑制电路
•单位增益稳定
•热关机保护电路
•-40℃至+85℃工作温度范围
•提供绿色TSSOP-20（暴露垫），
-
[ CXAR41199 ]
目录
7.相关产品
产品概述 返回TOP
The CXAR41199 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.1W into a 4Ω load or 2.5W into a 3Ω load with typically 1% THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones.
To simplify audio system design, the CXAR41199 combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip.
The CXAR41199 features a low power consumption shutdown mode and thermal shutdown protection. It also utilizes circuitry to reduce “pop/click” during device turn-on.
The CXAR41199 is available in Green TSSOP-20 (Exposed Pad), TQFN-3×3-20L, TSSOP-16 (Exposed Pad), SOIC-16 and DIP-16 packages. It operates over an ambient temperature range of -40℃ to +85℃.
产品特点 返回TOP
• 2.5W into 3Ω Load from 5V Power Supply at
THD+N = 1% (Typical, per Channel)
• 2.1W into 4Ω Load from 5V Power Supply at
THD+N = 1% (Typical, per Channel)
• 1.3W into 8Ω Load from 5V Power Supply at
THD+N = 1% (Typical, per Channel)
• Low Shutdown Current: 0.03μA
• Operation Supply Voltage: 2.8V to 5.5V
• Stereo Headphone Amplifier Mode
• “Pop/Click” Suppression Circuitry
• Unity-Gain Stable
• Thermal Shutdown Protection Circuitry
• -40℃ to +85℃ Operating Temperature Range
• Available in Green TSSOP-20 (Exposed Pad),
TQFN-3×3-20L, TSSOP-16 (Exposed Pad),
SOIC-16 and DIP-16 Packages
应用范围 返回TOP
Multimedia Monitors
Portable and Desktop Computers
Portable Televisions
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
音频功率放大器 |
||||||||
|
Part Number |
CH |
SHDN |
VCC (Min)(V) |
VCC (Max)(V) |
Differential Input |
Output Voltage @VCC=3.6V(W) |
Output Voltage @VCC=5V(W) |
Package |
|
Stereo |
H |
2.8 |
5.5 |
N |
0.7 |
1.3 |
DIP-16 TSSOP-20(EP) TSSOP -16(EP) SOIC-16TQFN-3x3-20L |
|
|
Stereo |
L |
2.6 |
5.5 |
N |
0.7 |
1.3 |
TQFN-4x4-16L |
|
|
Mono |
H |
2.5 |
5.5 |
N |
1.2 |
SOIC-8 SOIC-8(EP) |
||
|
Stereo |
L |
2.8 |
5.5 |
N |
0.7 |
1.3 |
TQFN-4x4-24L |
|
|
Mono |
L |
2.5 |
5.5 |
N |
0.6 |
1.2 |
TDFN-2x2-8L |
|
|
Mono |
L |
2.5 |
5.5 |
Y |
0.65 |
1.3 |
TDFN-3x3-8L MSOP-8(EP) |
|
|
Mono |
L |
2.5 |
5.5 |
Y |
0.65 |
1.3 |
TDFN-2x2-8L |
|
|
Mono |
L |
2.5 |
5.5 |
Y |
0.65 |
1.3 |
MSOP-8 MSOP-10 TDFN-3x3-10L |
|
◀ 上一篇:CXAR41198单个音频信号输入单轨到轨的5阶视频滤波器带宽为8MHz转换速率为33V/μs工作电压为3.0V到5.5V低噪音和THD视频驱动程序可以驱动两个视频加载
下一篇▶:CXAR41200立体声音频功率放大器移动电话和其他便携式通信设备通道2.6W的连续平均功率从5V电源传输到4Ω负载中通常失真率为10%外部控制低功耗关机模式和热关机保护
| 推荐信息 |
|---|
[/e:loop] |
| 头条信息 |
|---|
