CXAR41172是一款高效率的单声道全桥式驱动D类音频放大器。当电源电压为12V时，CXAR41172 能在输出负载为8Ω的扬声器上，输送出6.5W / 10% 的输出功率及失真度。全差动输入设计比起单端输入更能有效抑制噪声。利用G0与G1两个接脚，可以选择增益为 12、18、23.6或是35.5dB。CXAR41172提供输出短路与过热保护，以避免芯片的损毁
• 工作电压：8 V至24 V
• 独特调变方案来减少EMI干扰
• 负载8Ω，工作电压12V时，输出可达6.5W (10% THD+N)
• 输出短路保护 (输出不需额外的两颗Schottky Diodes)
• 静态电流：8mA Typ at 12V
• 关断电流：1μA Typ
• 具散热垫 24-pin TSSOP包装
-
[ CXAR41172 ]
目录
7.相关产品
产品概述 返回TOP
CXAR41172是一款高效率的单声道全桥式驱动D类音频放大器。当电源电压为12V时，CXAR41172 能在输出负载为8Ω的扬声器上，输送出6.5W / 10% 的输出功率及失真度。全差动输入设计比起单端输入更能有效抑制噪声。利用G0与G1两个接脚，可以选择增益为 12、18、23.6或是35.5dB。CXAR41172提供输出短路与过热保护，以避免芯片的损毁。 CXAR41172采用TSSOP封装，不需额外的散热垫。The CXAR41172 is a high efficiency, mono bridged-tied load (BTL), class-D audio power amplifier. Operating from a 12V power supply, CXAR41172 is capable of delivering 6.5W of continuous output power to a 8Ω load with 10% THD+N. The CXAR41172 features a differential input architecture offering improved noise immunity over a single-ended (SE) input amplifier. Amplifier gain is internally configured and can be selected to 12, 18, 23.6 or 35.5dB utilizing the Go and G1 gain select pins. The CXAR41172 also features short-circuit and thermal protection preventing the device from being damaged during a fault condition. The CXAR41172 is available in thermally efficient 24-pin TSSOP package and does not require an external heat sink.
产品特点 返回TOP
• 工作电压：8 V至24 V
• 独特调变方案来减少EMI干扰
• 负载8Ω，工作电压12V时，输出可达6.5W (10% THD+N)
• 输出短路保护 (输出不需额外的两颗Schottky Diodes)
• 静态电流：8mA Typ at 12V
• 关断电流：1μA Typ
• 具散热垫 24-pin TSSOP包装
• 符合RoHS规范及Pb-Free
Wide Supply Voltage: 8V to 24V
Unique Modulation Scheme Reduces EMI Emission
6.5W into 8Ω Load From 12V Supply (10% THD+N)
Short circuit Protection (Save two Schottky Diodes.)
Low Supply Current….8mA Typ at 12V
Shutdown Current…...1μA Typ
24-pin TSSOP Package with Thermal Pad
RoHS compliant and 100% lead(Pb)-free
应用范围 返回TOP
• 2.1声道笔记型计算机
• LCD 屏幕/电视
• 个人计算机环绕音效设备
• 免手持汽车配件
2.1 Notebook PCs
LCD Monitors/TVs
PC Surround Speakers
Hands-Free Car Kits
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
a
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品.......
|
音频放大器 > D类 > D类放大器 |
||||||||||
|
Part Number |
remark |
Vin (V) |
Speaker (W) |
Speaker (Ω) |
Headphone |
No of Speaker Channel |
THD +N @ 1KHz (%) |
IQ (mA)(Typ) |
PSRR (dB) |
Package |
|
10-W Inductor Free Stereo Audio Amplifier with Low EMI |
4.5~14.5 |
10 |
8 |
- |
2 |
0.07 |
22 |
60 |
TSSOP-28 |
|
|
2W High Efficiency Mono Class-D Audio Power Amplifier with Non-Clip |
3~5 |
2 |
8 |
N/A |
1 |
0.09 |
9 |
70 |
WCSP-16 |
|
|
2.8W/CH Stereo Filterless Class-D Audio Amplifier with |
2.7~5.5 |
2.8 |
4 |
110mW/32Ω |
2 |
0.2 |
6.5 |
60 |
SOP-24,TQFN-20 |
|
|
2.5W/CH Stereo Filterless Class-D Audio Amplifier with 64-Step DC Volume Control |
2.7~5.5 |
2.5 |
4 |
N/A |
2 |
0.2 |
6.5 |
60 |
SOP-16 |
|
|
3.3W Mono Class-D Audio Power Amplifier with Non-Clip, Power Limit and Noise Gate |
2.5~5.5 |
3.3 |
4 |
N/A |
1 |
0.15 |
4 |
70 |
WCSP-9 |
|
|
2.5-W/CH Stereo Filter-less Class-D Audio Power Amplifier with Auto-Recovery |
2.5 ~ 5.5 |
2.5 |
4 |
N/A |
2 |
0.13 |
6.2 |
63 |
TQFN-20,TSSOP-20 |
|
|
Low EMI, 2.8-W Mono Filterless Class-D Audio Power Amplifier with Auto-Recovery |
2.5~5.5 |
2.8 |
4 |
N/A |
1 |
0.1 |
41 |
68 |
SOP-8 |
|
|
Non-Clip, Low EMI, 2.8W Mono Filterless Class-D Audio Power Amplifier with Auto-Recovery |
2.5 ~ 5.5 |
2.8 |
4 |
N/A |
1 |
0.15 |
3.5 |
70 |
WCSP-9,TDFN-8 |
|
|
2.5W Stereo Class-D Audio Power Amplifier with 3D Enhancement |
2.5 ~ 5.5 |
2.5 |
4 |
N/A |
2 |
0.2 |
7.3 |
70 |
TQFN-24 |
|
|
3-W Mono Filterless Class-D Audio Power Amplifier |
2.5 ~ 5.5 |
3 |
4 |
N/A |
1 |
0.18 |
4.3 |
72 |
TDFN-8, WCSP |
|
|
6.5-W Mono Class-D Audio Power Amplifier |
8 ~ 24 |
6.5 |
8 |
N/A |
1 |
0.08 |
8 |
70 |
TSSOP-24 |
|
|
15-W Stereo Class-D Audio Power Amplifier with Speaker Protection |
5.5~26 |
15 |
8 |
- |
2 |
0.2 |
45 |
60 |
TSSOP-28 |
|
|
6-W Stereo Class-D Audio Power Amplifier with Speaker Protection |
5.5~26 |
6 |
8 |
N/A |
2 |
0.2 |
45mA |
60 |
TSSOP-28 |
|
| 头条信息 |
|---|
