CXLE81105增压转换器包含一个0.46Ω的内部开关。该集成电路工作在恒定频率600千赫，允许使用微型，低成本和低高度的电感和电容器。集成电路的工作电压为2.7伏至7伏。采用大补偿电容器消除启动时的大涌流。恒定频率电流模式的PWM结构导致低，可预测的输出噪声。该CXL8105包括按周期700毫安电流限制，以最大限度地提高电感电流和过温保护电路。当VOUT超过26V时，将启用过电压保护。LED的电流由FB和GND之间连接的电阻器设置
·2.7V至7V输入电压范围
·600kHz工作频率
26V高输出电压
·过电压保护
5kHz至100kHz的脉宽调制亮度控制
内置循环电流限制
·0.2V低参考电压
-
[ CXLE81105 ]"
目录
7.相关产品
产品概述 返回TOP
The CXLE81105 boost converter contains a 0.46Ω internal switch. The IC operates at constant frequency 600 kHz, allowing the use of tiny, low cost and low height inductors and capacitors. The IC operates from a 2.7V to 7V supply voltage. High inrush current at start-up is eliminated using large compensation capacitor. Constant frequency current mode PWM architecture results in low, predictable output noise. The CXLE81105 includes cycle-by-cycle 700mA current limit to maximize inductor current and over-temperature protection circuit. The over-voltage protection will be enabled when VOUT exceeds 26V. The current of LED is set by a resistor connected between FB and GND. The CXLE81105 is available in TDFN2X2-6 package.
产品特点 返回TOP
„ 2.7V to 7V Input Voltage Range
„ 600kHz Operating Frequency
„ 26V High Output Voltage
„ Over-Voltage Protection
„ 5kHz to 100kHz PWM Brightness Control
„ Built-in Cycle-by-Cycle Current Limit
„ 0.2V Low Reference Voltage
„ TDFN2X2-6 Package
应用范围 返回TOP
„ Cellular Phone
„ LED Module
„ Compact Back Light Module
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
LED Backlight Driver |
|||||||||
|
Part NO. |
Vin(V) min. |
Vin(V) max. |
CH |
VOUT (max) |
ISW (A) |
FSW (kHz) |
VLED FB(V) |
Note |
Package |
|
2.5 |
5.5 |
1 |
20 |
1.2 |
1000 |
0.1/0.2 / 0.3 |
LX,GND,FB,EN,OVP,VIN,EN Dimming 100~200kHz,6SxP |
TSOT23-6 |
|
|
2.5 |
5.5 |
1 |
40 |
1.2 |
1000 |
0.2 |
LX,GND,FB,EN,OVP,VIN,EN Dimming 100~200kHz |
TSOT23-6 |
|
|
4.2 |
24 |
6 |
40 |
2 |
600 |
1.25 |
30mA/CH,Dimming 100~25kHz,EN,OCP, OVP,PWM/DC/Mixed DimmingMode |
TQFN4X4-20 |
|
|
2.7 |
5.5 |
6 |
40 |
2 |
600 |
1.25 |
30mA/CH,Dimming 100~25kHz,EN,OCP, OVP,PWM/DC/Mixed Dimming Mode |
TQFN4X4-20 |
|
|
2.5 |
20 |
1 |
20 |
1.2 |
1000 |
0.2 |
OVP,FB,DIMC,GND,LX,BP,PWM, EN,PWM Dimming 100~200kHz,6SxP |
TDFN2X2-8 |
|
|
2.5 |
5.5 |
1 |
40 |
1.2 |
1000 |
0.2 |
LX,GND,FB,EN,OVP,VIN,EN Dimming 100~200kHz |
SOT23-6 |
|
|
2.7 |
5.5 |
1 |
28 |
0.85 |
1000 |
0.2 |
LX,GND,FB,EN,OVP,IN |
TDFN2X2-8/SOT-23-6 |
|
|
2.7 |
7 |
1 |
26 |
0.7 |
600 |
0.2*EN Duty |
FB,COMP,GND,LX, EN,VIN,5k~100kHz EN BrightnessControl |
TDFN2X2-6 |
|
|
2.7 |
7 |
1 |
38 |
0.7 |
600 |
0.2*EN Duty |
FB,COMP,GND,LX, EN,VIN,5k~100kHz EN BrightnessControl |
TDFN2X2-6 |
|
|
5 |
24 |
6 |
40 |
2 |
1000 |
1.23 |
30mA/CH,PWM dimming,EN,SS,OCP, OVP,OTP,OLP,SLP |
TQFN3X3-16 |
|
|
3.2 |
24 |
6 |
40 |
2 |
1000 |
1.23 |
30mA/CH,PWM dimming,EN,SS,OCP, OVP,OTP,OLP,SLP |
TQFN3X3-16 |
|
|
5 |
24 |
6 |
50 |
2 |
750 |
1.23 |
30mA/CH, PWM dimming, EN,SS, OCP,OVP,OTP,OLP |
TQFN4X4-20 |
|
|
4.2 |
24 |
8 |
48 |
3 |
1000 |
0.6 |
30mA/CH,PWM dimming,EN,SS,OCP, OVP,OTP,OLP |
TQFN4X4-24 TSSOP20(FD) |
|
|
7 |
18 |
1 |
EXT |
VCS SET |
ADJ |
1.2 |
Programmable ILED, PWM Dimming, Hiccup mode for OVP,SCP |
SOP-16 |
|
|
10 |
30 |
4 |
EXT |
VCS SET |
ADJ |
0.8 |
20mA~150mA/CH, PWM dimming,EN, SS,OCP,OVP,OTP, OLP,SLP |
TSSOP20(FD) |
|
|
7 |
27 |
4 |
EXT |
VCS SET |
ADJ |
1.23 |
Programmable ILED,True PWM& Analog Dimming,Hiccup mode for OVP,OLP, SLP |
TQFN4X4-24 TQFN4X4-28 |
|
|
5 |
28 |
12 |
EXT |
VCS SET |
ADJ |
0.6 |
60mA/CH G5997,120mA/CH G5999 Analog& PWM Dimming,Slope comp.,OCP,UVP,OTP, Hiccup mode for OVP,SLP |
SOP28/TSSOP18(FD)/TQFN5X5-28 |
|
