CXLE88129是一款适用于相机模组Flash LED的电荷泵驱动芯片。相比采用电感升压的方式，CXLE88129驱动方案只需一个充电电容，并具有更好的EMI性能。它可工作在闪光灯和手电筒两种工作模式下。在闪光灯模式下最大能输出1A电流，并内置了安全保护时间，以防止LED过热烧毁
•输入3.6V时，闪光灯模式能输出最大1A电流
•具有闪光灯模式和手电筒模式
•闪光灯模式下具有安全保护时间
•1倍和2倍模式自由切换
•输入电压2.7V～5.5V
•通过Flash管脚能实现驱动与相机模组同步
•内置短路保护、过压保护、过流保护和过温保护功能
•具有软启动功能
-
[ CXLE88129 ]"
目录
7.相关产品
产品概述 返回TOP
CXLE88129是一款适用于相机模组Flash LED的电荷泵驱动芯片。相比采用电感升压的方式，CXLE88129驱动方案只需一个充电电容，并具有更好的EMI性能。它可工作在闪光灯和手电筒两种工作模式下。在闪光灯模式下最大能输出1A电流，并内置了安全保护时间，以防止LED过热烧毁。CXLE88129采用TDFN-10和WCSP-12的封装。The CXLE88129 is a large-current charge pump designed specifically for white LEDs used in camera flash applications. Only one small bucket capacitor is required to develop the output drive, providing a low EMI solution compared with inductive boost regulators. The CXLE88129 has two operation modes: Flash mode and Movie mode. In Flash mode, the CXLE88129 is capable of delivering up to 1A. A safety timer is also included to ensure the LED can not be on indefinitely and overheat. The CXLE88129 is available in a 10-pin TDFN and WCSP-12 packages.
产品特点 返回TOP
•输入3.6V时，闪光灯模式能输出最大1A电流
•具有闪光灯模式和手电筒模式
•闪光灯模式下具有安全保护时间
•1倍和2倍模式自由切换
•输入电压2.7V～5.5V
•通过Flash管脚能实现驱动与相机模组同步
•具有软启动功能
•采用3mm×3mm的TDFN-10封装和1.2mm×1.6mm的WCSP-12封装
•符合RoHS规范及Pb-Free
Flash mode - output current up to 1A at
VIN=3.6V
Flash and movie - two selectable modes
Built in flash mode safety timer protection
1X and 2X automatic mode for high efficiency
Input range – 2.7V to 5.5V
External flash control pin for synchronization to
a camera module or graphics controller
Short-circuit, over-voltage, over-current and
over-temperature protection
Soft-start functionality
3mm′3mm TDFN-10 and 1.2mm′1.6mm
WCSP-12 Packages
RoHS compliant and 100% lead (Pb)-free
Halogen-Free
应用范围 返回TOP
•移动手机相机模组
•数位相机
•具有照相功能的便携设备
Mobile Camera Phones
Digital Cameras
PDAs with Built-In Cameras
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
a
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
白光LED驅動器 > LED闪光灯驱动 |
||||||||
|
Part Number |
remark |
Vin (V) |
Iout (mA) |
Max LED |
IQ (mA) |
Freq. (KHz) |
Peak Efficency (%) |
Package |
|
Synchronous Boost Flash LED Driver and Dual 1.5A High Side Current Source with I2C Compatible Interface |
2.5-5.5 |
2500 |
2 |
0.45 |
2000 |
85 |
1.410mm X 1.810mm WCSP12 |
|
|
Synchronous Boost Flash LED Driver and Dual 1.5A High Side Current Source with I2C Compatible Interface |
2.5-5.5 |
1500 |
2 |
0.45 |
2000 |
85 |
1.410mm X 1.810mm WCSP12 |
|
|
1.5A Synchronous Boost LED Flash Driver with I2C Compatible Interface |
2.5-5.5 |
1500 |
1 |
0.45 |
2000 |
85 |
1.410mm X 1.810mm WCSP12 |
|
|
Charge Pump Flash LED Driver with Safety Timer |
2.7~5.5 |
700 |
1 |
0.5/4 |
2400 |
95 |
TDFN-10 |
|
|
1A Charge Pump LED Driver |
2.7~5.5 |
1000 |
1 |
0.5/1.5 |
2200 |
97 |
TDFN-10 |
|
|
1.5A Dual WLED Flash Driver with I2C Compatible Interface |
2.7~5.5 |
1500 |
2 |
0.48 |
2000 |
85 |
TDFN-10 |
|
|
1.5A Synchronous Boost LED Flash Driver with I2C Compatible Interface |
2.5~5.5 |
1500 |
1 |
1.28 |
4000 |
85 |
WCSP-9 |
|
