• [ CXLE8291 ]

样品申请

目录

1.产品概述       2.产品特点     KN3嘉泰姆

3.应用范围       4.技术规格书下载（PDF文档）KN3嘉泰姆

5.产品封装       6.电路原理图  KN3嘉泰姆

7.相关产品KN3嘉泰姆

   产品概述 返回TOPKN3嘉泰姆

      The CXLE8291 is a set-up DC-DC converter that delivers a regulated output current. The device switches at a 1.0MHz constant frequency,allowing for the use of small value external inductor and ceramic capacitors.The CXLE8291 is targeted to be used for driving loads up to 1A from a two-cell alkaline battery. The LED current can be programmed by the external current sense resistor, RS, connected between the feedback pin (FB) and ground. A low 95mV feedback voltage reduces the power loss in the Rs for better efficiency. With its internal 2A, 100mΩ NMOS switch, the device can provide high efficiency even at heavy load. During the shutdown mode, the feedback resistor RS and the load are completely disconnected and the current consumption is reduced to less than 1μA.The CXLE8291 is available in the 6-lead TSOT26 package.CXLE8291是采用PWM控制模式开关型DC-DC升压恒流驱动，用于驱动3W大功率白光LED。LED电流可通过外部反馈电阻调节500mA~1A输出，95mV的反馈电压可以有效减少外部电阻的损耗。固定1MHZ开关频率。使用较小的电感和陶介电容。输入电压：1.8－3.6V。LED电流可通过外部电阻设定。反馈电压95mV。具有2A NMOS开关管（100mΩ）在高负载下可提供高效率。通过DC直流电压加到FB端对LED亮度进行细调或PWM信号加到SHDN。LED功能效率达：90％。电流精度：±5％。低启动电压：0.9V（Iled＝270mA）.低维持电压：0.75V（LED电流＝200mA）。内部2AMOSFET开关。开路LED保护。过温保护，带过压保护可空载。封装：SOT23-6。　

   产品特点 返回TOPKN3嘉泰姆

   LED Power Efficiency: up to 90%KN3嘉泰姆

 Current Accuracy: 5%(VIN = 3.6V to 1.8V @VF = 3.7V)KN3嘉泰姆

 Low Start-Up Voltage: 0.9V (ILED = 270mA)KN3嘉泰姆

 Low Hold Voltage: 0.75 (ILED = 200mA)KN3嘉泰姆

 1MHz Switching FrequencyKN3嘉泰姆

 Uses Small, Low Profile External ComponentsKN3嘉泰姆

 Low RDS(ON): 100mΩ (typ)KN3嘉泰姆

 Over Temperature ProtectionKN3嘉泰姆

 Low Profile TSOT26 PackageKN3嘉泰姆

 Pb-Free PackageKN3嘉泰姆

   应用范围 返回TOPKN3嘉泰姆

  White LED Torch (Flashlight)KN3嘉泰姆

 White LED Camera FlashKN3嘉泰姆

 DSC(Digital Still Camera)FlashKN3嘉泰姆

 Cellular Camera Phone FlashKN3嘉泰姆

 PDA Camera FlashKN3嘉泰姆

 Camcorder Torch(Flashlight) LampKN3嘉泰姆

   技术规格书（产品PDF) 返回TOP KN3嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！KN3嘉泰姆

 KN3嘉泰姆

产品封装图 返回TOPKN3嘉泰姆

KN3嘉泰姆

电路原理图 返回TOPKN3嘉泰姆

 KN3嘉泰姆

相关芯片选择指南 返回TOP               更多同类产品。。。。。

◀ 上一篇:CXLE8290单级高功率因数原边控制交流转直流LED驱动芯片功率因数校正PFC功能60W的驱动能力每周期峰值电流控制可调节恒流输出电流及输出功率软启动功能

返回顶部

下一篇▶:CXLE8292连续模式感应降压转换器电压有效地驱动单个或多个串联LED内置高精度电流检测器开关式1A恒流芯片软启动1.5Mhz开关频率6~40V输入电流1A

共有条评论 用户名: 密码: 验证码: 匿名发表