• [ 产品资料下载 ]

样品申请

目录

• 1.产品概述       2.产品特点     Bko嘉泰姆

• 3.应用范围       4.技术规格书下载（PDF文档）Bko嘉泰姆

• 5.产品封装       6.电路原理图  Bko嘉泰姆

• 7.相关产品Bko嘉泰姆

   产品概述 返回TOPBko嘉泰姆

      The CXSU63041 devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer, or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider. It provides high efficient power conversion and is capable of delivering output currents up to 1.5A at 5V at a supply voltage down to 2V. The implemented boost converter is based on a fixed switching frequency (500kHz typical), current-mode controller using a synchronous rectifier to obtain maximum efficiency. Boost switch and rectifier switch are connected internally to provide the lowest leakage inductance and best EMI behavior possible. The current-mode control scheme provides fast transient response and good output voltage accuracy. At light load, the converter will automatically enter into Pulse Frequency Modulation (PFM) operation to reduce the dominant switching losses. During PFM operation, the IC consumes very low quiescent current and maintains high efficiency over a wide load current range. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. The device allows use of small inductors and output capacitors for USB devices.

   产品特点 返回TOPBko嘉泰姆

 97% Efficiency at VOUT=5V from 3.3V Input Bko嘉泰姆

 Device Quiescent Current: 37μA (Typ) Bko嘉泰姆

 Guaranteed 2.5A Output Current at VOUT=5V from 3.3V Input Bko嘉泰姆

 500kHz PWM Switching Frequency Bko嘉泰姆

 Synchronous and Embedded Power MOSFETs, No Schottky Diode Required Bko嘉泰姆

 Low RDS(ON) (main switch/synchronous switch) at 5.0V output:   20/40mohm Bko嘉泰姆

 Input Voltage Range: 1.8V to 5.25V Bko嘉泰姆

 Adjustable Output Voltage Range: from 2.5V to 5.5V Bko嘉泰姆

 Pulse Frequency Modulation Operation for Improved Efficiency at Low Output Power Bko嘉泰姆

 Current Mode Operation with Internal Compensation for Excellent Line    and Load Transient Response Bko嘉泰姆

 Logic Controlled Shutdown(<1μA) Bko嘉泰姆

 Load Disconnect During Shutdown Bko嘉泰姆

 Automatic output discharge at shutdown: Bko嘉泰姆

    CXSU63041A: Auto output discharge function Bko嘉泰姆

   CXSU63041B: No output discharge function Bko嘉泰姆

 Low Battery Comparator Bko嘉泰姆

 Internal Soft-Start to Limit Inrush Current Bko嘉泰姆

 Over Current Protection Bko嘉泰姆

 Input Under Voltage Lockout Bko嘉泰姆

 Output Over Voltage Protection Bko嘉泰姆

 Over-Temperature Protection Bko嘉泰姆

 Available in 2.1mm x 2.1mm QFN10 PackageBko嘉泰姆

   应用范围 返回TOPBko嘉泰姆

 All Single Cell Li or Dual Cell Battery Operated Products as Tablet PC, Smartbook and Other Portable Equipment Bko嘉泰姆

 Products including portable HDMI and USB-OTG Bko嘉泰姆

 USB Hosts Without Native 5V Supplies Bko嘉泰姆

 USB Charging Port (5V) Bko嘉泰姆

 Power Bank, Battery Backup Units Bko嘉泰姆

 Wireless Peripherals Bko嘉泰姆

 Portable Audio Players Bko嘉泰姆

 Personal Medical Devices Bko嘉泰姆

 Industrial Metering Equipments Bko嘉泰姆

 DC/DC Micro ModulesBko嘉泰姆

   技术规格书（产品PDF) 返回TOP Bko嘉泰姆

     需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！Bko嘉泰姆

 Bko嘉泰姆

产品封装图 返回TOPBko嘉泰姆

Bko嘉泰姆

电路原理图 返回TOPBko嘉泰姆

Bko嘉泰姆

相关芯片选择指南 返回TOP             更多同类产品........    

 Bko嘉泰姆

◀ 上一篇:固定1.2兆赫振荡器频率电流模式升压调节器CXSU63040自动进入脉冲频率调制PFM低ESR输出电容稳定

返回顶部

下一篇▶:恒定频率PWM电流模控制驱动N型功率管的高效同步升压芯片CXSU63042同步整流提高效率减小功耗PWM峰值电流模控制

共有条评论 用户名: 密码: 验证码: 匿名发表