CXSU63041B设备为单电池锂离子或锂聚合物,或两到三电池碱性、镍镉或镍氢电池供电的产品提供电源解决方案。转换器产生稳定的输出电压,可由外部电阻分压器调节。它提供高效率的功率转换,并且能够在电源电压下降到2V时在5V处输出高达1.5 A的输出电流。所实现的Boost转换器基于固定开关频率(典型的500 kHz),电流模式控制器使用同步整流器获得最大效率
-
"
目录
产品概述 返回TOP
The CXSU63041 devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer, or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider. It provides high efficient power conversion and is capable of delivering output currents up to 1.5A at 5V at a supply voltage down to 2V. The implemented boost converter is based on a fixed switching frequency (500kHz typical), current-mode controller using a synchronous rectifier to obtain maximum efficiency. Boost switch and rectifier switch are connected internally to provide the lowest leakage inductance and best EMI behavior possible. The current-mode control scheme provides fast transient response and good output voltage accuracy. At light load, the converter will automatically enter into Pulse Frequency Modulation (PFM) operation to reduce the dominant switching losses. During PFM operation, the IC consumes very low quiescent current and maintains high efficiency over a wide load current range. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. The device allows use of small inductors and output capacitors for USB devices.
产品特点 返回TOP
97% Efficiency at VOUT=5V from 3.3V Input
Device Quiescent Current: 37μA (Typ)
Guaranteed 2.5A Output Current at VOUT=5V from 3.3V Input
500kHz PWM Switching Frequency
Synchronous and Embedded Power MOSFETs, No Schottky Diode Required
Low RDS(ON) (main switch/synchronous switch) at 5.0V output: 20/40mohm
Input Voltage Range: 1.8V to 5.25V
Adjustable Output Voltage Range: from 2.5V to 5.5V
Pulse Frequency Modulation Operation for Improved Efficiency at Low Output Power
Current Mode Operation with Internal Compensation for Excellent Line and Load Transient Response
Logic Controlled Shutdown(<1μA)
Load Disconnect During Shutdown
Automatic output discharge at shutdown:
CXSU63041A: Auto output discharge function
CXSU63041B: No output discharge function
Low Battery Comparator
Internal Soft-Start to Limit Inrush Current
Over Current Protection
Input Under Voltage Lockout
Output Over Voltage Protection
Over-Temperature Protection
Available in 2.1mm x 2.1mm QFN10 Package
应用范围 返回TOP
All Single Cell Li or Dual Cell Battery Operated Products as Tablet PC, Smartbook and Other Portable Equipment
Products including portable HDMI and USB-OTG
USB Hosts Without Native 5V Supplies
USB Charging Port (5V)
Power Bank, Battery Backup Units
Wireless Peripherals
Portable Audio Players
Personal Medical Devices
Industrial Metering Equipments
DC/DC Micro Modules
技术规格书(产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品........
内置MOS同步DC-DC升压IC |
||||||||||
型号 |
工作模式 |
电压范围 |
输出电压 |
输出电压形式 |
输出电压精度 |
输出电流限制 |
静态电流 |
工作频率 |
封装 |
|
PWM |
0.9V-5.0V |
最大5.5V |
可调输出 |
+/-2% |
950mA |
90% |
0.1uA |
1.4MHz |
SOT-26 |
|
PWM |
0.85V-5.0V |
最大5.0V |
可调输出 |
+/-2% |
2A |
93% |
0.1uA |
1.5MHz |
SOT23-6 |
|
PWM |
0.85V-5.5V |
2.5V-5.5V |
可调输出/真关断 |
+/-2% |
1.2A |
94% |
300uA |
1.2MHz |
SOT23-6 |
|
PWM |
2.5V-4.5V |
最大6V |
可调输出 |
+/-2% |
3.3A |
93% |
100uA |
1MHz |
ESOP-8 |
|
PWM |
2.4V-6.0V |
2.5V-5.3V |
可调输出/真关断 |
+/-2% |
6A |
91% |
180uA |
500KHz |
ESOP-8 |
|
PWM |
2.5V-5.25V |
2.5V-5.5V |
可调输出 |
+/-2% |
8A |
90% |
45uA |
500KHz |
ESOP-8 |
|
PWM |
2.8V-5.0V |
最大5.5V |
可调输出 |
+/-2% |
4A |
91% |
180uA |
550KHz |
ESOP-8 |
|
PWM |
2.5V-6.0V |
最大5.5V |
可调输出/真关断 |
+/-2% |
6A |
90% |
0.5uA |
1.2MHz |
SOP8-PP |
|
PWM |
2.5V-5.5V |
最大5.5V |
可调输出/真关断 |
+/-2% |
6A |
90% |
0.5uA |
1.2MHz |
QFN4X4-16L |
|
PWM |
1.8V-6.0V |
最大5.5V |
可调输出/真关断 |
+/-2% |
6A |
90% |
0.5uA |
1.2MHz |
SOP8-PP |
|
PWM |
1.8V-5.25V |
2.5V-5.5V |
可调输出 |
+/-2% |
5A |
97% |
10uA |
500KHz |
QFN2X2-10 |