• [ 产品资料下载 ]

样品申请

目录Zb6嘉泰姆

1.产品概述                       2.产品特点Zb6嘉泰姆
3.应用范围                       4.下载产品资料PDF文档 Zb6嘉泰姆
5.产品封装图                     6.电路原理图                   Zb6嘉泰姆
7.功能概述                        8.相关产品Zb6嘉泰姆

一,产品概述(General Description)         Zb6嘉泰姆

    The CXSD61055 is a fully integrated, high– efficiency 2A synchronous rectified step-down converter.The CXSD61055 operates at high efficiency over a wide output current load range.Zb6嘉泰姆
This device offers two operation modes, PWM control and PFM Mode switching control, which allows a high efficiency over the wider range of the load.Zb6嘉泰姆
    The CXSD61055 requires a minimum number of readily available standard externalZb6嘉泰姆
components and is available in an 6-pin SOT23 ROHS compliant package.Zb6嘉泰姆
二.产品特点(Features)Zb6嘉泰姆

1.)High Efficiency: Up to 96%Zb6嘉泰姆
2.)600KHz Frequency OperationZb6嘉泰姆
3.)2A Output CurrentZb6嘉泰姆
4.)No Schottky Diode RequiredZb6嘉泰姆
5.)4.5V to 16V Input Voltage RangeZb6嘉泰姆
6.)0.6V ReferenceZb6嘉泰姆
7.)Slope Compensated Current Mode Control forZb6嘉泰姆
     Excellent Line and Load Transient ResponseZb6嘉泰姆
8.)Integrated internal compensationZb6嘉泰姆
9.)Stable with Low ESR Ceramic Output CapacitorsZb6嘉泰姆
10.)Over Current Protection with Hiccup-ModeZb6嘉泰姆
11.)Thermal ShutdownZb6嘉泰姆
12.)Inrush Current Limit and Soft StartZb6嘉泰姆
13.)Available in SOT23-6 PackageZb6嘉泰姆
14.)-40°C to +85°C Temperature RangeZb6嘉泰姆
三,应用范围 (Applications)Zb6嘉泰姆

Distributed Power SystemsZb6嘉泰姆
Digital Set Top BoxesZb6嘉泰姆
Flat Panel Television and MonitorsZb6嘉泰姆
Wireless and DSL ModemsZb6嘉泰姆
Notebook ComputerZb6嘉泰姆
四.下载产品资料PDF文档 Zb6嘉泰姆

需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！Zb6嘉泰姆

 Zb6嘉泰姆

五,产品封装图 (Package)Zb6嘉泰姆
Zb6嘉泰姆
六.电路原理图Zb6嘉泰姆

Zb6嘉泰姆
七,功能概述Zb6嘉泰姆

Internal RegulatorZb6嘉泰姆
    The CXSD61055 is a current mode step down DC/DC converter that provides excellent transientZb6嘉泰姆
response with no extra external compensation components. This device contains an internal,Zb6嘉泰姆
low resistance, high voltage power MOSFET, and operates at a high 600K operating frequency toZb6嘉泰姆
ensure a compact, high efficiency design with excellent AC and DC performance. Zb6嘉泰姆
Error AmplifierZb6嘉泰姆
The error amplifier compares the FB pin voltage with the internal FB reference (V FB) and outputs aZb6嘉泰姆
current proportional to the difference between the two. This output current is then used to chargeZb6嘉泰姆
or discharge the internal compensation network to form the COMP voltage, which is used toZb6嘉泰姆
control the power MOSFET current.The optimized internal compensation network minimizes theZb6嘉泰姆
external component counts and simplifies the control loop design. Zb6嘉泰姆
Internal Soft-StartZb6嘉泰姆
The soft-start is implemented to prevent the converter output voltage from overshootingZb6嘉泰姆
during startup. When the chip starts, the internal circuitry generates a soft-start voltage (SS)Zb6嘉泰姆
ramping up from 0V to 0.6V. When it is lower than the internal reference (REF), SS overridesZb6嘉泰姆
REF so the error amplifier uses SS as the reference. When SS is higher than REF, REFZb6嘉泰姆
regains control. The SS time is internally fixed to 1 ms. Over-Current-Protection and HiccupZb6嘉泰姆
The CXSD61055 has cycle-by-cycle over current limit when the inductor current peak valueZb6嘉泰姆
exceeds the set current limit threshold. Meanwhile, output voltage starts to drop until FBZb6嘉泰姆
is below the Under-Voltage (UV) threshold,typically 30% below the reference. Once a UV isZb6嘉泰姆
triggered, the CXSD61055 enters hiccup mode to periodically restart the part. This protection modeZb6嘉泰姆
is especially useful when the output is dead-short to ground. The average short circuitZb6嘉泰姆
current is greatly reduced to alleviate the thermal issue and to protect the regulator. The CXSD61055Zb6嘉泰姆
exits the hiccup mode once the over current condition is removed. Zb6嘉泰姆
Startup and ShutdownZb6嘉泰姆
If both VIN and EN are higher than their appropriate thresholds, the chip starts. TheZb6嘉泰姆
reference block starts first, generating stable reference voltage and currents, and then theZb6嘉泰姆
internal regulator is enabled. The regulator provides stable supply for the remainingZb6嘉泰姆
circuitries. Three events can shut down the chip: EN low, VIN low and thermal shutdown. In theZb6嘉泰姆
shutdown procedure, the signaling path is first blocked to avoid any fault triggering. The COMPZb6嘉泰姆
voltage and the internal supply rail are then pulled down. The floating driver is not subject toZb6嘉泰姆
this shutdown command.Zb6嘉泰姆
八,相关产品                     更多同类产品......Zb6嘉泰姆

◀ 上一篇:CXSD61054 fully in tegrated , high-efficiency 2.0A synchronous rectified step-down converter high efficiency over a wide output current load range

返回顶部

下一篇▶:CXSD61055A step-down DC/DC converter wide 4.5V to 21V input voltage range 2A continuous load current capability

共有条评论 用户名: 密码: 验证码: 匿名发表