CXHA3126是一个互补的双前置驱动器输出与嵌入式霍尔效应传感器集成电路。它集成了用于NPN或NMOS驱动器的输出钳位图腾磁极驱动器、高灵敏度霍尔效应传感器、SIP-4L封装的转子锁定事件计时器，使该解决方案尽可能简单地在直流电机或风扇的高功率条件下运行。为了安全起见，锁定关闭功能将关闭IC的内部驱动器，避免转子锁定时过热，IC将在这些驱动器关闭后尝试重新启动转子扭矩热关机保护（TSD）确保IC内部驱动器在安全工作温度范围内工作。上述所有保护机制结合起来，在电机系统中提供完整的保护方案，避免任何可能的损坏，并保证在正确和安全的操作下。
˙高灵敏度霍尔效应传感器
˙低功耗
输出夹紧图腾磁极驱动器
˙锁定关机保护和自动重启功能
边缘检测器和传播延迟定时器
˙热关机保护（TSD）
˙提供SIP-4L包装
12V至48V直流电机/风扇系统
-
[ CXHA3126 ]"
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载（PDF文档）
一.产品概述
CXHA3126 is a complementary dual pre-drivers output with embedded Hall-effect sensor IC. It integrates a output clamping totem-pole drivers for NPN or NMOS drivers, a high sensitivity hall-effect sensor, an event timer for rotor locked in SIP-4L package, which make this solution operation under a high power conditions of DC motors or FANs as simply as possible.
For safety, Lock-shutdown function would turn the IC’s internal drivers off avoiding over-heat when the rotor is locked, and IC will try to re-start the rotor’s torque after the time of these drivers’ shutdown.
Thermal-shutdown protection (TSD) ensures the internal drivers of IC are operating under a safe operating temperature range.
All the protection mechanisms mentioned above combine to provide a complete protecting scenario in the motor system and avoid any possible damages and guarantee under a correct and safe operation.
二.产品特点
˙High sensitivity Hall-effect sensor
˙Low power consumption
˙Output clamping totem-pole drivers
˙Lock-shutdown protection & auto-restart function
˙Edge detector and propagation delay timer
˙Thermal shutdown protection(TSD)
˙Available in SIP-4L package
˙For 12V to 48V DC motor / FAN systems
三.应用范围
Motor drive
四.技术规格书（产品PDF)
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
五.产品封装图
六.电路原理图
七.相关芯片选择指南
| HALL EFFECT SENSOR E-BIKE App.电动车应用霍尔效应传感器 | |||||||
| Part No. | VIN | IOUT | Operating | Package | Status | Notes | |
| (Min) | (Max) | Temperature(℃) | |||||
| (V) | (V) | (mA) | |||||
| CXHA3118 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3119 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | Hall Switch for E-Bike App. |
| CXHA3120 | 2.4 | 16 | 50 | -20 to 105 | SIP-3L、SOT23 | MP | E-Bike App. |
| CXHA3121 | 3 | 28 | 50 | -40 to 125 | SIP-3L | MP | E-bike Motor Hall Sensor |
| CXHA3122 | 2.7 | 7 | -20 to 85 | SIP-3L | MP | Linear Hall Sensor 1.3mV/G / E-Bike App. | |
| CXHA3123 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L 、SOT23 | MP | Hall Switch for E-Bike App. |
| CXHA3124 | 2.4 | 16 | 50 | -40 to 125 | SIP-3L SOT23 | MP | Hall Switch for E-Bike App. |
| HALL EFFECT SENSOR >> Others App. | ||||||||
| Part No. | VIN | IOUT | Coil Type | Operating | Notes | Package | Status | |
| (Min) | (Max) | Temperature | ||||||
| (V) | (mA) | (℃) | ||||||
| CXHA3125 | 3 | 20 | 25 | -20 to 100 | Hall Sensor IC | SIP-3L | MP | |
| CXHA3125N | 3 | 28 | 50 | -40 to 150 | Hall Sensor IC | SIP-3L | MP | |
| CXHA3126 | 12 | 48 | 20 | Half Wave | -40 to 105 | Complementary Dual Pre-Driver | SIP-4L | MP |
