CXLB73124是一款适用于单电池锂离子电池的完整恒流恒压线性充电器。它的PSOP8包和较低的外部组件数量使CXLB73124非常适合便携式应用。此外，CXLB73124可以在USB和墙壁适配器中工作。由于内部PMOSFET结构，无需阻塞二极管，并具有防止负电荷电流电路。热反馈调节充电电流，以在高功率运行或高环境温度下限制模具温度。充电电压固定在4.2V，充电电流可通过一个电阻器进行外部编程。当达到最终浮充电压后，充电电流降至编程值的1/10时，CXLB73124自动终止充电循环。CXLB73124其他功能包括电流监视器、欠压锁定、自动充电和两个状态引脚，用于指示充电终止和输入电压的存在。
-
[ CXLB73124 ]
目录
7.相关产品
产品概述 返回TOP
The CXLB73124 is a complete constant - current & constant-voltage linear charger for single cell lithium-ion batteries. Its PSOP8 package and low external component count make the CXLB73124 ideally suited for portable applications. Further more , the CXLB73124 can work within USB and wall adapter. No blocking diode is required due to the internal PMOSFET architecture and have prevent to negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The CXLB73124automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. CXLB73124Other features include current monitor, under voltage lockout, automatic recharge and two status pin to indicate charge termination and the presence of an input voltage.
产品特点 返回TOP
Programmable Charge Current Up to 1000mA
No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in SOP-8 Package for Single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage
Charges Single Cell Li-Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with 1.5% Accuracy
Automatic Recharge
Two Charge Status Output Pins
C/10 Charge Termination
2.9V Trickle Charge Threshold
Soft-Start Limits Inrush Current
Available Radiator in PSOP8 Package, the Radiator need connect GND or impending
应用范围 返回TOP
Charging Docks and Cradles
Cellular Telephones, PDAs, GPS
MP3、MP4 Player
Digital Still Cameras, Portable Devices
USB Bus-Powered Chargers, Chargers
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
Battery Charger（锂电池充电） |
|||||||
|
Product |
status |
VccMax |
Vbat |
IOUT Max |
Polarity Detect |
OTP、OCP |
Pkg |
|
Active |
8V |
4.35 |
1A |
NO |
Yes |
SOT23-5 PSOP8 |
|
|
Active |
8V |
4.22 |
1A |
NO |
Yes |
SOP8 PSOP8（电子烟） |
|
|
Active |
8V |
4.22 |
800mA |
NO(单灯) |
Yes |
SOT23-5 |
|
|
Active |
8V |
4.22 |
800mA |
NO(双灯） |
Yes |
SOT23-6 PSOP8 |
|
|
Active |
8V |
4.22 |
1A |
NO |
Yes |
PSOP8/DFN2*2-6 |
|
|
Active |
8V |
4.22/4.35 |
2.5A |
YES(单灯） |
Yes |
PSOP8 |
|
|
Active |
8V |
4.22/4.35 |
2.5A |
YES(双灯） |
Yes |
PSOP8 |
|
◀ 上一篇:可编程充电电流800毫安CXLB73123单电池恒流恒压线性充电器锂离子和锂聚合物电池当充电电流降至编程值的1/10时自动终止充电循环达到最终浮充电压后的值
下一篇▶:1MHz固定开关频率防倒灌功能CXLB73125单节锂电池恒压恒流充电模式的充电管理IC自动再充电休眠模式电池温度保护功能双灯显示充电状态欠压保护过温保护
| 头条信息 |
|---|
