CXLB7388系列是高度集成的单电池手提式锂离子/聚合物电池充电器设备。CXLB7388X接受两个电源输入，通常一个来自USB端口，另一个来自交流适配器。CXLB7388X自动选择
USB端口或交流适配器作为系统。在USB配置中，主机可以选择100毫安和500毫安的两种预设充电率。在交流适配器配置外部电阻器设置充电电流的大小，可以是编程为1A。CXLB7388X分三个阶段为蓄电池充电：调节、恒定电流和恒定电压。根据最小电流终止充电。一个内部充电计时器提供备用充电安全终止。CXLB7388X自动重新启动如果蓄电池电压低于内部电压，则充电门槛。CXLB7388X也会自动进入睡眠状态两个电源都被卸下时的模式。没有外感充电需要电阻器或阻塞二极管。CXLB7388X集成了内部功率FET、电流
传感器、充电状态和反向电流保护单片器件。
-
[ 产品资料下载 ]
目录
7.相关产品
产品概述 返回TOP
The CXLB7388X series are highly integrated single cell
Li-Ion/Polymer battery charger IC designed for handheld
devices. The CXLB7388X accepts two power inputs,
normally one from a USB port and another one from
AC-adaptor. The CXLB7388X automatically selects the
USB-Port or the AC-adapter as the power source for the
system. In the USB configuration, the host can select from
the two preset charge rates of 100 mA and 500 mA. In the
AC−adapter configuration an external resistor sets the
magnitude of the charge current, which may be
programmed up to 1A.
The CXLB7388X charges the battery in three phases:
conditioning, constant current, and constant voltage.
Charge is terminated based on minimum current. An
internal charge timer provides a backup safety for charge
termination. The CXLB7388X automatically re-starts the
charge if the battery voltage falls below an internal
threshold. The CXLB7388X also automatically enters sleep
mode when both supplies are removed. No external sense
resistor or blocking diode is required for charging.
The CXLB7388X integrates internal power FET , current
sensor, charge status and reverse current protection in a
single monolithic devices.
产品特点 返回TOP
Charges Single Cell Li-Ion/Polymer from Either
AC Adapter or USB With Autonomous
Power-Source Selection
Integrated Power FET and Current Sensor for Up
to 1A Charge Applications From AC Adapter
Integrated USB Control With Selectable
100 mA and 500 mA Charge Rates
Precharge Conditioning With Safety Timer
Power Good (AC Adapter Present) Status Output
Optional Battery Temperature Monitoring Before
and During Charge
Automatic Sleep Mode for Low-Power
Consumption
Available in TDFN-10 Package
RoHS Compliant and 100% Lead (Pb)-Free
应用范围 返回TOP
Smartphones
Digital Cameras
PDAs/ MP3 Players
Other Battery-Powered Devices
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品.....
|
Standalone Linear Li-Ion Battery Charger With Thermal Regulation in ThinSOT |
|||||||
|
Part Number |
remark |
Packs |
Vin (V) |
Charge Current (A) |
Charge Termination |
Control Topology |
Temperature Monitoring |
|
XStandalone Linear Li-Ion Battery Charger With Thermal Regulation in ThinSOT |
1 Cells, Li-Ion |
4.35 ~ 6.5 |
800mA |
Minimum current |
Linear W/FET |
No |
|
|
Linear Li-Ion/Polymer Charger IC with Integrated FET and Charger Timer |
1 Cells, Li-Ion |
4.35 ~ 6 |
1 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
|
Dual Source AC/USB Li-Ion/Polymer Charger IC for Portable Applications |
1 Cells, Li-Ion |
4.35 ~ 6 USB |
1 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
|
Li-ion/Li Polymer Battery Charger |
1 Cells, Li-Ion |
4.3 ~ 6.5 |
2 |
Minimum current & Safety timer |
Linear W/FET |
Yes |
|
|
witch Mode Li-Ion/Polymer Battery Charger |
1/2 Cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |
|
|
Switch Mode Li-Ion/Polymer Battery Charger |
1/2 Cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |
|
|
Switch Mode Li-Ion/Polymer Battery Charger |
1 cells, Li-Ion |
4.7~20 |
1~3 |
Minimum current & Safety timer |
Switching |
Yes |
|
◀ 上一篇:蓄电池进行三相充电调节恒定电流和恒定电压CXLB7387高度集成的单电池锂离子聚合物电池充电器集成电路独立的线性锂离子电池充电器功率FET电流传感器充电状态和反向电流保护
下一篇▶:1.5A高度集成线性单电池锂离子聚合物充电器集成电路带集成FET充电器定时器CXLB7389手持设备设计交流适配器USB端口线性充电器工作电池分为三个阶段滴流恒流恒定电压
