CXLB7382是一款用于单电池锂离子电池的完整恒流/恒压线性充电器。它的SOT33-5封装和低外部组件数量使CXLB7382非常适合便携式应用。此外，tcxlb7382可以在USB和墙壁适配器中工作。由于内部PMOSFET结构，无需阻塞二极管，并具有防止负电荷电流电路。热反馈调节充电电流，以在高功率运行或高环境温度下限制模具温度。充电电压固定在4.2V，充电电流可通过一个电阻器进行外部编程。达到最终浮充电压后，当充电电流降至编程值的1/10时，CXLB7382自动终止充电循环。CXLB7382其他功能包括电流监视器、欠压锁定、自动充电和指示充电终止的充电状态引脚
-
[ 产品资料下载 ]
目录
7.相关产品
产品概述 返回TOP
The CXLB7382 is a complete constant‐current/constant‐voltage linear charger for single cell lithium‐ion batteries. Its SOT23‐5 package and low external component count make the CXLB7382 ideally suited for portable applications. Furthermore, the TCXLB7382can work within USB and wall adapter. No blocking diode is required due to the internal PMOSFET architecture and have prevent to negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The CXLB7382automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. CXLB7382Other features include current monitor, under voltage lockout, automatic recharge and charge status pin to indicate charge termination.
产品特点 返回TOP
Programmable Charge Current Up to 800mA
No MOSFET, Sense Resistor or Blocking Diode Rquired
Complete Linear Charger in SOT23‐5 Package for Single Cell Lithium‐Ion Batteries
Constant‐Current/Constant‐Voltage
Charges Single Cell Li‐Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with 1.5% Accuracy
Automatic Recharge
Charge Status Output Pins
C/10 Charge Termination
2.9V Trickle Charge Threshold
Soft‐Start Limits Inrush Current
Available Radiator in SOT23‐5 Package, the Radiator need connect GND or impending
应用范围 返回TOP
Cellular Telephones, PDAs, GPS
Charging Docks and Cradles
Digital Still Cameras, Portable Devices
USB Bus‐Powered Chargers, Chargers
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
|
Battery Management |
||
|
Part No. |
Package |
Description |
|
SOT23-5 |
0.8A Standalone Linear Li-lon Battery Charger with Thermal Regulation |
|
|
SOP9-PP |
1A Standalone Linear Li-lon Battery Charger with Thermal Regulation |
|
|
WCSP |
Fully Integrated Switch-Mode ChargerWith USB Compliance and USB-OTG Support |
|
◀ 上一篇:1节锂离子电池,锂聚合物电池提供定电压充电CXLB7381温度控制CV充电电压及CC充电电流安全地为锂离子锂聚合物电池充电电阻连接到充电状态输出端充电状态输出端电压充电状态
下一篇▶:CXLB7383独立线性锂离子电池充电器单电池锂离子电池的完整恒流/恒压线性充电器可编程充电电流1000毫安预设4.2V充电电压精度为1.5%
| 热门信息 |
|---|
| 最新信息 |
|---|
| 推荐信息 |
|---|
