产品信息查询
产品 技术 新闻 资料
首页 > 产品中心 > 电池充电芯片 > 锂电充电芯片 > 单节锂电池充电芯片 >3MHz同步开关模式电池充电器USB-OTG升压调节器CXLB7374结合开关模式电池充电器和升压调节器DC/DC转换器4伏到6伏的宽输入电压
3MHz同步开关模式电池充电器USB-OTG升压调节器CXLB7374结合开关模式电池充电器和升压调节器DC/DC转换器4伏到6伏的宽输入电压
12

CXLB7374结合了开关模式电池充电器和一个具有固定3MHz开关频率的升压调节器,后者驱动两个集成N通道功率mosfet。在电池充电中,高效降压型DC/DC转换器能够在4伏到6伏的宽输入电压范围内为CXLB7374提供1.5安的输出电流,降压型DC/DC转换器非常适合由1芯锂离子电池供电的便携式电子设备。充电参数和工作模式可通过I2C接口编程。CXLB7374具有高精度的输入电流、充电电流和充电电压调节。它配有充电终端和充电状态监测,用于电池检测。CXLB7374将蓄电池充电分为三个阶段:调节、恒流和恒压。CXLB7374采用动态电源管理(DPM)模式来完成输入功率限制。输入电流限制为I2C主机设置的值。当达到输入功率限制时,此功能可降低电池充电电流,以避免在同时为负载和电池充电器供电时使交流适配器过载。充电终止基于电池电压、编程的最小电流水平和由I 2C主机设置的充电电流终止位。如果蓄电池电压低于内部阈值,CXLB7374将自动重新启动充电循环,当输入电压低于蓄电池电压时,它将进入低静态电流睡眠模式。CXLB7374支持热调节和过温保护,通过降低充电电流来保持120℃的结温。CXLB7374可以作为增压调节器工作。为了支持USB OTG设备,CXLB7374可以通过提高电池电压来提供VBU(5.05V)。

3MHz同步开关模式电池充电器USB-OTG升压调节器CXLB7374结合开关模式电池充电器和升压调节器DC/DC转换器4伏到6伏的宽输入电压
产品手册
样品申请

样品申请

产品简介

目录

1.产品概述       2.产品特点     C6N嘉泰姆

3.应用范围       4.技术规格书下载(PDF文档)C6N嘉泰姆

5.产品封装       6.电路原理图  C6N嘉泰姆

7.相关产品C6N嘉泰姆

   产品概述 返回TOPC6N嘉泰姆


The CXLB7374 combine switch-mode battery charger and a boost regulator with fixed 3MHz switching frequency, which drives two integrated N-channel power MOSFETs. In battery charging, the high-efficiency step-down DC/DC converter is capable of delivering 1.5A output current over a wide input voltage range from 4V to 6V for CXLB7374, the step-down DC/DC converter is ideally suited for portable electronic devices that are powered from 1-cell Li-ion battery. The Charging parameters and operating modes can be programmed through an I 2C interface. The CXLB7374 has high accuracy regulation of input current, charge current and charge voltage. It equipped with charge termination, and charge status monitoring for battery detection. The CXLB7374charge the battery in three phases: conditioning, constant current and constant voltage. The CXLB7374features Dynamic Power Management (DPM) mode to accomplish input power limiting. The input current is limited to the value set by the I 2C host. This feature reduces battery charge current when the input power limit is reached to avoid overloading the AC adapter when supplying the load and the battery charger simultaneously. The charge termination is based on battery voltage, a programmed minimum current level and charge current termination bit set by the I 2C host. If the battery voltage falls below an internal threshold, the CXLB7374automatically restarts the charge cycle, and when the input voltage falls below the battery voltage, it will enter a low-quiescent current sleep mode. The CXLB7374supports the thermal regulation and over temperature protection to maintain the junction temperature of 120 oC by reducing charge current. The CXLB7374can operate as a boost regulator. To support USB OTG device, CXLB7374can provide VBUS (5.05V) by boosting the battery voltage. The CXLB7374is available in1.7mmx2.1mm WLCSP-20 and TQFN4x4-20A packages.

   产品特点 返回TOPC6N嘉泰姆


· Charge Faster Than Linear Charger C6N嘉泰姆

· 3MHz with 0% to 99.5% Duty Cycle Synchronous Switch-Mode Charger with 1.5A Integrated NMOSFETC6N嘉泰姆

· 4V-6V Input Operating Range C6N嘉泰姆

· 20V Absolute Maximum Input Voltage C6N嘉泰姆

· Safety -Reverse leakage protection to prevent battery drainage C6N嘉泰姆

-Thermal regulation and protection C6N嘉泰姆

 -Input/output over-voltage protection C6N嘉泰姆

 -Cycle-by-cycle current limit C6N嘉泰姆

· Accuracy C6N嘉泰姆

 -+1% charge voltage regulation (0 to 85oC) C6N嘉泰姆

 -+5% charge current regulation C6N嘉泰姆

 -+5% input current regulation (100mA and 500mA) C6N嘉泰姆

· Built-In Input Current Sensing and Limiting C6N嘉泰姆

· Automatic Charging C6N嘉泰姆

· Programmable Through High-Speed I2C Interface(3.4Mb/s) C6N嘉泰姆

 -Input Current Limit C6N嘉泰姆

 -Fast-Charge and Termination Current C6N嘉泰姆

 -Charge Regulation Voltage C6N嘉泰姆

 -Weak Battery Voltage Threshold C6N嘉泰姆

 -VIN DPM Threshold C6N嘉泰姆

 -Termination Enable/Disable C6N嘉泰姆

-OTG Enable/Disable C6N嘉泰姆

 -Reset All Parameter Control C6N嘉泰姆

 -Safety Timer with Reset Control C6N嘉泰姆

· 5V, 500mA Boost Mode for USB OTG for 2.5V to 4.5V Battery InputC6N嘉泰姆

· Available in 1.7mmx2.1mm WLCSP-20 and TQFN4x4-20A PackagesC6N嘉泰姆

   应用范围 返回TOPC6N嘉泰姆


· Cell Phones, Smart Phones and PDAs C6N嘉泰姆

· Tablet PC C6N嘉泰姆

· Portable Media Players, Handheld DeviceC6N嘉泰姆

   技术规格书(产品PDF) 返回TOP C6N嘉泰姆


     需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持C6N嘉泰姆

 QQ截图20160419174301.jpgC6N嘉泰姆

产品封装图 返回TOPC6N嘉泰姆


blob.pngblob.pngC6N嘉泰姆

电路原理图 返回TOPC6N嘉泰姆

 C6N嘉泰姆


 C6N嘉泰姆

blob.png

相关芯片选择指南 返回TOP                            更多同类产品......


 C6N嘉泰姆

Battery Charger > Switching ChargersC6N嘉泰姆

Part_No C6N嘉泰姆

 Package C6N嘉泰姆

TopologyC6N嘉泰姆

#of PWM Outputs C6N嘉泰姆

Drive Lout (A) C6N嘉泰姆

Vin (V) C6N嘉泰姆

FmaxC6N嘉泰姆

Khz C6N嘉泰姆

SYNCC6N嘉泰姆

ASYNC C6N嘉泰姆

VBUS_PMID RDS(ON)C6N嘉泰姆

milohm C6N嘉泰姆

R-Top milohm C6N嘉泰姆

R-Sync milohm C6N嘉泰姆

Iq(no C6N嘉泰姆

load)C6N嘉泰姆

(uA) C6N嘉泰姆

minC6N嘉泰姆

maxC6N嘉泰姆

CXLB7374C6N嘉泰姆

WLCSP1.7x2.1-20/TQFN4x4-20AC6N嘉泰姆

BuckC6N嘉泰姆

1C6N嘉泰姆

1C6N嘉泰姆

4C6N嘉泰姆

6C6N嘉泰姆

3000C6N嘉泰姆

SYNCC6N嘉泰姆

180/220C6N嘉泰姆

130/170C6N嘉泰姆

150/190C6N嘉泰姆

63C6N嘉泰姆

发表评论
    共有条评论
    用户名: 密码:
    验证码: 匿名发表

热门信息
  • 最新信息
    推荐信息
    相关文章
  • CXLD64221附带电压检测功能的高耐压正电压CMOS工艺调
  • CXLC8997通电延迟时间和栅极导通电压下降时间均由外部
  • CXLC8996A高性能升压调节器4通道LED驱动器低损耗线性
  • CXLC8995 CXLC8995A高性能的升压调节器低损耗线性调节
  • CXLC8986 CXLC8987包括高性能升压稳压器6通道LED驱动
  • 20V N沟道增强型MOS场效应管,CXMS5270用于大功率大电
  • CXAF4101高效升压单声道AB/D类可选式音频功率放大电路
  • CXAF4101高效升压单声道AB/D类可选式音频功率放大电路
  • CXAF4101高效升压单声道AB/D类可选式音频功率放大电路
  • CXAF4101高效升压单声道AB/D类可选式音频功率放大电路
  • 推荐资讯
    智能电表驱动技术全景解析:从计量芯片到通信模块的完整指南
    智能电表驱动技术全景
    电子秤显示模块核心技术解析:从LCD驱动到智能接口的全方案指南
    电子秤显示模块核心技
    显示驱动电路深度解析:从基础原理到先进设计的完整指南  SEO关键词:
    显示驱动电路深度解析
    智能家电控制系统全面解析:从技术原理到未来趋势的深度指南
    智能家电控制系统全面
    串行通信接口终极指南:从基础原理到高速协议的全景解析
    串行通信接口终极指南
    家电显示控制系统全景解读:从UI设计到智能交互的技术演进
    家电显示控制系统全景
    辉度调节技术全面解析:从PWM调光到智能亮度控制的全景指南
    辉度调节技术全面解析
    串行接口终极指南:从UART到PCIe,详解串行通信原理与应用
    串行接口终极指南:从UA
    显示控制系统深度解析:从驱动原理到多屏交互的全景指南
    显示控制系统深度解析
    段码LED显示技术详解:原理、应用与选型指南
    段码LED显示技术详解:
    键盘扫描揭秘:从原理到应用,全面解析键盘如何识键如神
    键盘扫描揭秘:从原理到
    恒流驱动:终极指南 - 原理、优势与应用场景
    恒流驱动:终极指南 -