CXLB7312是一个单电池，完全集成恒流（CC）/恒流电压（CV）锂离子电池充电器。其紧凑的包装，外部最小组件需求使CXLB7312成为便携式应用的理想选择。CXLB7312不需要外部感测电阻器或阻断二极管。内置热反馈机制调节充电电流控制高功率运行或环境温度升高时的模具温度温度。
CXLB7312具有预充电功能，用于深度放电的滴流充电电池。快速充电电流可由外部电阻编程。一旦电池的充电曲线，CV调节模式将自动启用达到恒压部分。然后输出电流衰减当充电电流降至编程值的1/10时，最终终止。CXLB7312持续监测蓄电池电压并启用新的充电周期一旦电压降到低于CV值150毫伏，电源状态将持续监测并自动将蓄电池放电电流降至最小值当CXLB7312检测到输入电源不足时。在关机模式下，CXLB7312可将电源电流降低至小于25μA。状态引脚输出逻辑高/低指示充电状态和电源的存在。其他功能包括充电电流监视器，欠压锁定
-
[ 产品资料下载 ]
目录
1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载（产品PDF文档）
5.产品封装图 6.电路原理图 7.功能概述 8.相关产品
一,产品概述(General Description) 
The CXLB7312 is a single cell, fully integrated constant current (CC)/constant
voltage (CV) Li-ion battery charger. Its compact package with minimum external
components requirement makes the CXLB7312 ideal for portable applications.
No external sense resistor or blocking diode is necessary for the CXLB7312.
Build-in thermal feedback mechanism regulates the charge current to control
the die temperature during high power operation or at elevated ambient
temperature.
The CXLB7312 has a pre-charge function for trickle charging deeply discharged
batteries. The fast charge current can be programmed by an external resistor.
CV regulation mode is automatically enabled once the battery’s charging curve
reaches the constant voltage portion. The output current then decays and is
finally terminated once the charge current drops to 1/10th of the programmed value.
The CXLB7312 keeps monitoring the battery voltage and enables a new charge cycle
once the voltage drops by 150mV below the CV value.Power supply state is constantly
monitored and the battery drain current is reduced to minimum value automatically
when the CXLB7312 senses a lack of input power. In its shutdown mode, the CXLB7312
can reduce the supply current to less than 25μA. A status pin outputs a logic HIGH/LOW
to indicate the charging status and the presence of power supply.
Other features include charge current monitor,under-voltage lockout.
二.产品特点(Features)
·Standalone Capability with no Requirement
of External MOSFET, Sense Resistor orBlocking Diode.
·Complete Linear Charger in Compact Package
for Single Cell Lithium-Ion Batteries
·Programmable Pre-charge, Fast Charge and Termination Current.
·Constant-Current/Constant-Voltage Operation
with Thermal Regulation to Maximize Charge
Rate Without Risk of Overheating
·Charges Single Cell Li-Ion Batteries Directly from USB Port
·Preset 4.2V Charge Voltage with ±1% Accuracy
·Automatic Recharge
·Charge Status Output Pin
·C/10 Charge Termination
·25μA Supply Current in Shutdown
·2.9V Trickle Charge Threshold
·Soft-Start Limits Inrush Current
·Available in SOT-23-6 and ESOP8 Package
三,应用范围 (Applications)
Cellular Telephones, PDAs, MP3 Players
Charging Docks and Cradles
Bluetooths Applications
四.技术规格书下载（产品PDF）
需要详细的PDF规格书请扫一扫微信联系我们
五,产品封装图 (Package)
六.电路原理图
七,相关芯片选择指南
| 锂电池充电芯片(Li-ion Battery Charger ) | ||||||||
| Part No. | Features | VIN | Series Cells | Max Charger | Charger Type | Output Accu. | Package | Application |
| CXLB7310B | Temperature Regulation, Trickle Charge, C/10 Charge Termination, USB Compliant | 4.25~6.5V,Max 10V | 1 | 800mA | Linear | 4.2V±1% 4.3V±1% 4.4V±1% | SOT23-5 TSOT23-5 | 单节锂电供电设备 |
| CXLB7311B | 1A Lithium Ion Battery Linear Charger | 4~6.5V | 1 | 1A | Linear | 4.2V±1% 4.35V±1% | ESOP8 | 单节锂电供电设备 |
| CXLB7312 | 500mA/1.5A Lithium Ion Battery Linear Charger | 4.25~6V | 1 | 500mA/1.5A | Linear | 4.2V±1% 4.35V±1% | SOT23-6 ESOP8 | 单节锂电供电设备 |
| CXLB7313 | 2A Lithium Ion Battery Switching Charger | 4.2~6V | 1 | 2A | Switching | 4.2V±1% 4.35V±1% | DFN3x3-10 | 单节锂电供电设备 |
◀ 上一篇:1000mA可编程充电电流单节锂离子电池恒定电流恒定电压线性充电器CXLB7311B自动终止充电循环电池电量检测的充电电流监控器输出自动再充电C/10充电自动终止
下一篇▶:LED或系统接口的排水充电电流热调节状态输出CXLB7313低功耗5V适配器的2A锂离子电池开关充电器充电终止电路自动充电
| 热门信息 |
|---|
| 最新信息 |
|---|
| 推荐信息 |
|---|
