CXLB7248B是一款适用于单电池锂离子电池的完整恒流/恒压线性充电器。其薄型SOT封装和低外部组件数量使CXLB7248B非常适合便携式应用。此外，CXLB7248B是专门为在USB电源规格下工作而设计的。由于内部MOSFET结构，不需要外部感测电阻，也不需要阻塞二极管。热反馈调节充电电流，以在高功率运行或高环境温度下限制模具温度。充电电压固定在4.2V，充电电流可通过一个电阻器进行外部编程。达到最终浮充电压后，当充电电流降至编程值的1/10时，CXLB7248B自动终止充电循环。当卸下输入电源（墙壁适配器或USB电源）时，CXLB7248B自动进入低电流状态，将电池放电电流降至小于2μa。CXLB7248B可以进入关机模式，将电源电流降至25μa。其他功能包括充电电流监视器、欠压锁定、自动充电和一种状态引脚，用于指示电荷终止和输入电压的存在。
-
[ 产品资料下载 ]
目录
产品概述 返回TOP
The CXLB7248B is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. Its ThinSOT package and low external component count make the CXLB7248B ideally suited for portable applications. Furthermore, the CXLB7248B is specifically designed to work within USB power specifications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The CXLB7248B automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the CXLB7248B automatically enters a low current state, dropping the battery drain current to less than 2μA. The CXLB7248B can be put into shutdown mode, reducing the supply current to 25μA. Other features include charge current monitor, under voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.
产品特点 返回TOP
¾ Programmable Charge Current Up to 800mA
¾ No MOSFET, Sense Resistor or Blocking Diode Required
¾ Complete Linear Charger in ThinSOTTM Package for Single Cell Lithium-Ion Batteries
¾ Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating
¾ Charges Single Cell Li-Ion Batteries Directly from USB Port
¾ Preset 4.2V Charge Voltage with ±1% Accuracy
¾ Charge Current Monitor Output for Gas Gauging
¾ Automatic Recharge
¾ Charge Status Output Pin
¾ C/10 Charge Termination
¾ 25mA Supply Current in Shutdown
¾ 2.9V Trickle Charge Threshold
¾ Soft-Start Limits Inrush Current
¾ Available in 5-Lead SOT-23 Package
¾ When using a single lamp,the light is completely extinguished after fully charging.
应用范围 返回TOP
¾ Cellular Telephones, PDAs, MP3 Players
¾ Charging Docks and Cradles
¾ Bluetooth Applications.
技术规格书（产品PDF) 返回TOP
需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
产品封装图 返回TOP
电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
| 线性单节锂电充电IC | ||||||||
| 产品型号 | 输出电压 | 输入电压 | 最大充电电流 | 充电截止电压 | 精度 | 涓流充电截止电压 | 功耗 | 封装形式 |
| CXLB7244 | 4.2V | 4.5-12V | 200mA | 4.2V | ±1% | 2.9V | 55uA | SOT23-6 |
| CXLB7245DR | 4.2V | 4.5-6.0V | 300mA | 4.2V | ±1% | 2.9V | 350uA | DFN2*3-8 |
| CXLB7246DR | 4.2V | 4.25-6.5V | 200mA | 4.2V | ±1% | 2.9V | 350uA | DFN2*3-8 |
| CXLB7246MR | 4.2V | 4.25-6.5V | 200mA | 4.2V | ±1% | 2.9V | 150uA | SOT-25 |
| CXLB7247 | 4.2V | 4.25-6.5V | 1.2A | 4.2V | ±1% | 2.9V | 25uA | ESOP8 |
| CXLB7247ADR | 4.2V | 4.5-12V | 1A | 4.2V | ±1% | 2.9V | 55uA | DFN3*3-8 |
| CXLB7247B | 3.6V/4.2V | 4.25-6.5V | 1.2A | 3.6V-4.2V | ±1% | 2.9V | 25uA | ESOP8 |
| CXLB7247DR | 4.2V | 4.5V-8V | 1A | 4.2V | ±1% | 2.9V | 55uA | DFN3*3-8 |
| CXLB7248 | 4.2V | 4.25-6.5V | 800mA | 4.2V | ±1% | 2.9V | 25uA | SOT23-5 |
| CXLB7248B | 4.2V | 4.25-6.5V | 800mA | 4.2V | ±1% | 2.9V | 25uA | SOT23-5 |
| CXLB7248C | 4.2V | 4.25-6.5V | 500mA | 4.2V | ±1% | 2.9V | 25uA | SOT23-5 |
| CXLB7248D | 4.35V | 4.25-6V | 800mA | 4.35V | ±1% | 2.9V | 25uA | SOT23-5 |
| CXLB7249 | 4.2V | 4.25-6.5V | 800mA | 4.2V | ±1% | 2.9V | 85uA | SOT23-5 |
| CXLB7249B | 3.7V | 4-7V | 500mA | 3.7V | ±1% | 2.5V | 250uA | SOT23-5 |
| CXLB7249C | 2.8V | 4-7V | 500mA | 2.8V | ±1% | 2.0V | 250uA | SOT23-5 |
| CXLB7249D | 4.35V | 4.25-6.5V | 800mA | 4.35V | ±1% | 2.9V | 85uA | SOT23-5 |
| CXLB7250 | 4.2V | 4.0-8.0V | 1200mA | 4.2V | ±1% | 2.9V | 55uA | ESOP8 |
| CXLB7250A | 4.2V | 4.0-8.0V | 1200mA | 4.2V | ±1% | 2.9V | 55uA | ESOP8 |
| CXLB7250B | 4.35V | 4.0-8.0V | 1200mA | 4.35V | ±1% | 2.9V | 55uA | ESOP8 |
| CXLB7250C | 4.2V | 4.25-7.0V | 1000mA | 4.2V | ±1% | 2.9V | 55uA | ESOP8 |
| CXLB7250DR | 4.2V | 4.25-7.0V | 1000mA | 4.2V | ±1% | 2.9V | 50uA | DFN2X2-6L |
| CXLB7251 | 4.2V | 4.25-6.0V | 750mA | 4.2V | ±1% | 2.9V | 25uA | SOT23-6 |
| CXLB7251A | 4.2V | 4.25-6.0V | 800mA | 4.2V | ±1% | 2.9V | 25uA | SOT23-6 |
| CXLB7251B | 4.35V | 4.5-6.5V | 700mA | 4.35V | ±1% | 2.9V | 80uA | SOT-26 |
| CXLB7251C | 4.2V | 4.25-6.5V | 500mA | 4.2V | ±1% | 2.9V | 25uA | SOT-26 |
| CXLB7251D | 4.2V | 4.5-18V | 800mA | 4.2V | ±1% | 2.9V | 70uA | SOT-26 |
| CXLB7252 | 4.2V | 3.8-6.5V | 1A/0.5A | 4.2V | ±1% | 2.9V | 450uA | ESOP8/SOP8 |
| CXLB7253 | 4.2V | 4.5-7V | 扩流3A | 4.2V | ±1% | 2.9V | 1mA | SOP-8 |
| CXLB7366 | 4.2V | 4.5-12V | 700mA | 4.2V | ±1% | 2.9V | 55uA | SOT23-5 |
| CXLB7367 | 4.2V | 4.5-12V | 700mA | 4.2V | ±1% | 2.9V | 55uA | SOT23-6 |
| CXLB7254 | 4.2V | 4.25-6.5V | 1000mA | 4.2V | ±1% | 2.9V | 50uA | ESOP8 |
| CXLB7368 | 4.2V | 4.5-12V | 1000mA | 4.2V | ±1% | 2.9V | 55uA | ESOP8 |
| CXLB7255 | 4.2V | 4.5-5.5V | 800mA | 4.2V | ±1% | 2.9V | 48uA | DFN3*3-10 |
| CXLB7256 | 4.2V | 4.5V-18V | 1.3A | 4.2V | ±1% | 2.9V | 48uA | SOP8 |
| CXLB7256A | 4.2V | 4.5-18V | 1.6A | 4.2V | ±1% | 2.9V | 7uA | SOP-8 |
◀ 上一篇:独立的线性锂电池充电器CXLB7248单节锂电池恒流恒压线性充电IC充电电流可编程800mA过温保护涓流充电隔值2.9V
下一篇▶:单片热调节功能微型线性电池管理芯片CXLB7248C单片锂离子电池恒流恒压线形电源管理芯片可编程使充电电流500mA充电电流输出监控1/10充电电流终止
| 热门信息 |
|---|
| 最新信息 |
|---|
| 推荐信息 |
|---|
