|
CXDR75128/CXDR75129They provide excellent circuit reliability and low cost and adjustments when used with +5V, +3.3V, +3.0V- powered circuits. These circuits perform a single function: they assert | |||||||||||||||||||||||||||||||||||||||||
|
目录产品概述 返回TOP The CXDR75129L has an open-drain output stage, while the CXDR75128 have push-pull outputs. The CXDR75129’s open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The CXDR75128 have an active-low RESET output, while the CXDR75128 has an active-high RESET output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 0.8V. Low supply current makes the CXDR75128/CXDR75129 ideal for use in portable equipment. The CXDR75128/CXDR75129 are available in 5-pin SOT23-5 or TSOT-23-5 packages.The CXDR75128/CXDR75129 are microprocessor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. They provide excellent circuit reliability and low cost and adjustments when used with +5V, +3.3V, +3.0V- powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, with hysteresis keeping it asserted for time delay determined by externally programmable time delay generator after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available.产品特点 返回TOP „ Precision Monitoring of +3V, +3.3V, and +5V Power-Supply Voltages „ Fully Specified Over Temperature „ Available in Three Output Configurations Push-Pull RESET Output (CXDR75128L) Push-Pull RESET Output (CXDR75128H) Open-Drain RESET Output (CXDR75129L) „ Externally Programmable Time Delay Generator „ 14μA Supply Current „ Guaranteed Reset Valid to VCC = 0.8V „ Power Supply Transient Immunity „ 5 pin SOT-23-5 or TSOT-23-5 Packages „ 2% Threshold Accuracy 应用范围 返回TOP „ Computers „ Controllers „ Intelligent Instruments „ Critical μP and μC Power Monitoring „ Portable / Battery-Powered Equipment „ Automotive 技术规格书（产品PDF) 返回TOP 需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
| |||||||||||||||||||||||||||||||||||||||||
|
Delay Time Adjustable |
|||||||||
|
Part NO. |
VCC(V min. |
VCC(V max. |
Detecting Voltage(V) |
ICD source (μA) |
VTCD (V) |
Vth Accu racy(%) |
Isupply (μA) |
Note |
Package |
|
2.2 |
5.5 |
0.8*VCC |
1.1 |
0.833 |
-- |
4 |
Open-Drain RESET Output TMR(ms) =76000×CMR(uF) |
ADFN1.5X 1.5-6 |
|
|
0.8 |
5.5 |
2.2/3.7 |
0.18 |
-- |
2 |
29 |
CXDR75120H/L is a Push-Pull High/Low Reset CXDR75121L is an Open-Drain Low Reset TCD(ms)=5700×CD(uF) |
TSOT25 |
|
