|
The CXDR75109L has an open-drain output stage open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC active-high RESET output. The reset comparator | ||||||||||||||||||||||||||||||||
|
目录产品概述 返回TOP The CXDR75109L has an open-drain output stage, while the CXDR75108 have push-pull outputs. The CXDR75109L’s open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The GCXDR75108 have an active-low RESET output, while the CXDR75108 has an active-high RESET output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 1V. Low supply current makes the CXDR75108 CXDR75109 ideal for use in portable equipment. The CXDR75108 CXDR75109 are available in 3-pin SOT-23, TO-92, SC-70-3(SOT-323) and SOT-89 packages The CXDR75108 CXDR75109 are microprocessor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V, +3.3V, +3.0V- powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available.产品特点 返回TOP „ Precision Monitoring of +3V, +3.3V, and +5V Power-Supply Voltages „ Fully Specified Over Temperature „ Available in Three Output Configurations Push-Pull RESET Output (CXDR75108L) Push-Pull RESET Output (CXDR75108H) Open-Drain RESET Output (CXDR75109L) „ 2ms max Power-On Reset Pulse Width „ 14μA Supply Current „ Guaranteed Reset Valid to VCC = +1V „ Power Supply Transient Immunity „ No External Components „ 3-Pin SOT-23,TO-92, SC-70-3(SOT-323) and SOT-89 Packages „ 2% Reset Threshold Accuracy with 5% Hysteresis 应用范围 返回TOP „ Computers „ Controllers „ Intelligent Instruments „ Critical μP and μC Power Monitoring „ Portable / Battery-Powered Equipment „ Automotive 技术规格书（产品PDF) 返回TOP 需要详细的PDF规格书请扫一扫微信联系我们，还可以获得免费样品以及技术支持！
| ||||||||||||||||||||||||||||||||
|
Part NO. |
VCC(V min |
VCC(V max |
Detecting Voltage(V) |
Manual |
Delay (ms) |
VthAcc uracy(%) |
Isupply (μA) |
Note |
Package |
|
1 |
5.5 |
2.93 |
N |
360 |
-- |
9 |
CXDR75101 is a Push-Pull Reset CXDR75102 is an OpenDrain Reset |
SOT23 |
|
|
1 |
5.5 |
3/3.3/5 |
Y |
360 |
2 |
10 |
Push-Pull Active-low RESET Output Manual Reset Input |
SOT143 |
|
|
|
