CXDC6576降压型DC转换器设计的单片集成电路输出负载电流3A电压型非同步PWM控制150KHz开关频率 | |||||||||||||||||||||||||||||||||||||||||||||||
目录 1.产品概述 2.产品特点 3.应用范围 4.技术规格书下载(PDF文档) 一.产品概述 The CXDC6576 is a monolithic IC designed for a step-down DC/DC converter and is capable of driving a 3A load without an external transistor. Due to reducing the number of external components, the board space can be saved easily. The external shutdown function can be controlled by logic level and then come into standby mode.The internal compensation makes the feedback control have good line and load regulation without an external design. Regarding the protected function, the thermal shutdown is to prevent over temperature operating from damaging the device, and current limit is against over current operating of the output switch. If the current limit function occurred and VFB is down to 0.5V below, the switching frequency will be reduced. The CXDC6576 series operates at aswitching frequency of 150KHz thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Other features include a guaranteed +4%tolerance on output voltage under specified input voltage and output load conditions, and +15% on the oscillator frequency. The output version included a fixed 3.3V, 5V, 12V, and an adjustable type.CXDC6576 is available in a 5-lead TO-252 lead-free or green package. 二.产品特点 Output Voltage: 3.3V, 5V, 12V and Adjustable Output Version Adjustable Version Output Voltage Range, 1.23V to 15V +4% 150KHz +15% Fixed Switching Frequency Voltage Mode Non-Synchronous PWM Control Thermal-Shutdown and Current-Limit Protection ON/OFF Shutdown Control Input Operating Voltage can be up to 36V max. Output Load Current: 3A Low Power Standby Mode Built-in Switching Transistor On Chip 三.应用范围 Simple High-Efficiency Step-Down Regulator On-Card Switching Regulators Positive to Negative Converter 四.技术规格书(产品PDF) 需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持!
五.产品封装图
六.电路原理图
七.相关芯片选择指南 更多同类产品......
|