PWM控制2A同步整流DC转换器CXSD62194输入欠压锁闭1.2MHz和2.4MHz的开关频率2.7V~6.0V输入电压 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
目录7.相关产品 产品概述 返回TOP CXSD62194 系列产品是能对应陶瓷电容,内置0.11 Ω(TYP.)P沟道 MOS驱动晶体管及0.12Ω(TYP.)N沟道 MOS开关晶体管的降压同步整流DC/DC转换器。减小内置晶体管的导通电阻,能高效率,稳定地提供最大2.0A的输出电流。工作电压范围在2.7V~6.0V,通过内部0.8V(±2.0%) 的基准电压源,用外置电阻能任意地从0.9V设定输出电压。CXSD62194(PWM控制)能选择1.2MHz和2.4MHz的开关频率。软启动时间为1ms (TYP.),实现了快速启动。最大限定电流为4.0A (TYP.),能适用大电流的应用。在待机时能把消耗电流抑制在1.0μA以下。在待机时,由CL高速放电功能使LX-VSS之间的内部开关导通,通过内部电阻使CL的电荷放电。这可以在待机时防止后续电路的错误动作。内置了UVLO (输入欠压锁闭Under Voltage Lock Out) 功能,在输入电压低于2.4V(TYP.)时,强制性地停止内部驱动晶体管工作。The CXSD62194/CXSD62195 series is a group of synchronous-rectification step-down DC/DC converters with a built-in 0.11Ω (TYP.) P-channel MOS driver transistor and 0.12Ω(TYP.) N-channel MOS switching transistor, designed to allow the use of ceramic capacitors. The small on-resistances of these two internal driver transistors enable a high efficiency, stable power supply with an output current up to 2A. The CXSD62194/CXSD62195 series has operating voltage range of 2.7V~6.0V and a 0.8V (±2.0%) reference voltage, and using externally connected resistors, the output voltage can be set freely from 0.9V. With an internal switching frequency of 1.2MHz or 2.4MHz, small external components can be used. The CXSD62194 series is PWM control, and the CXSD62195 series is PWM/PFM, which automatically switches from PWM to PFM during light loads and provides high efficiency, high load response, low voltage ripple, can be achieved over a wide range of load conditions. The series have a high speed soft-start as fast as 1ms in typical for quick turn-on. It’s suitable for large-current application due to limit current is configured 4.0A in typical. During stand-by, all circuits are shutdown to reduce current consumption to as low as 1.0μA or less. The integrated CL discharge function which enables the electric charge at the output capacitor CL to be discharged via the internal discharge switch located between the LX and VSS pins. Due to CL discharge function, malfunction on LX is prevented when Stand-by mode. With the built-in UVLO (Under Voltage Lock Out) function, the internal P-channel driver transistor is forced OFF when input voltage becomes 2.5V or lower. The series are available in USP-10B, SOP-8FD packages. 产品特点 返回TOP 应用范围 返回TOP ● Smart phones / Mobile phones ● Bluetooth ● Mobile devices / terminals ● Portable game consoles ● Digital still cameras / Camcorders 技术规格书(产品PDF) 返回TOP 需要详细的PDF规格书请扫一扫微信联系我们,还可以获得免费样品以及技术支持! 产品封装图 返回TOP 电路原理图 返回TOP
相关芯片选择指南 返回TOP 更多同类产品......
发表评论
|